Updated photo with the bullet fairing.

[iowawarrior]

Originally Posted by bruce59

Try www.laminarlip.com (I think). They may make one for that fairing. Here's the one they make for Yamaha's mini fairing:

i have a small memphis shades. i didn't see anything on that site, but if there is a company that makes "lips", i'll bet there's one for mine. i'll check with memphis shades, see if they offer anything.

[Havoc]

Originally Posted by semperfit

It's the bullet fairing by Memphis Shades. The fairing came from phat performance parts. Black trigger lock plates came from custom cruiser parts (i believe) and the fork clamps were custom made by Memphis Shades.

Sent from my PC36100 using Motorcycle.com App

Is the fairing and hardware listed for a different type of bike (Raider?), cause Im not finding anything specifically for a warrior.

Thanks in advance

[Wolfmanhart]

Hello,

I believe the Bullet Fairing in the photo is Part# 2330-0080. The mounting plates that are the correct width for your forks are the Plate Only Kit# 2321-0245. In addition to this you would need the Fork Clamps. I have been putting together fork clamps for warrior owners to install batwing fairings and a couple for bullet fairings. I have not personally installed a bullet fairing on a warrior.If you are
Interested in the clamps and prepared to do a little custom fitting then send a check for $60 made out to St. Jude Children's Hospital to:

Memphis Shades Inc.
P.O.Box 429
Rossville, TN 38066
Attn: Steve Freeman
Include a note with your complete address and "Please Send Warrior
Fork Clamps"


Thank you,
Steve Freeman

[Ruqwknf27]

How do your factory blinkers location work with the Bullet fairing?

[christok]

Originally Posted by dinggus

Same fairing that Jax uses on his old Harley?


Sent from my iPhone using Motorcycle.com Free App

No he uses the Arlen Ness fairing like the one on my harley in my gallery except I made the one on mine

[1256day]

I'll be meeting up with Semperfit in a couple of hours, I'll let him know there is questions about the set up on the 4m. Pics do not do it justice. Looks really nice.

G

[Pwfyrcat1]

Originally Posted by semperfit

For those interested in the bullet fairing it takes a lot of the wind off your chest. I like the look and the functionality of it.

Sent from my PC36100 using Motorcycle.com App

Does it also keep the wind from sneaking up under/around your helmet. Wind in my face was one of the reasons I got rid of the yammie boulevard shield.

[oldman]

Originally Posted by Ruqwknf27

How do your factory blinkers location work with the Bullet fairing?

Sure looks like it in the pic he posted.

[joeyalessi]

Still waiting for my fork clamps, should be any day now

[jabo]

I like it.