Hard to starting agen

[joeysmith]

Sorry 2nd vid will be up soon my mouther in law got hit in her truck as I was doing the 2nd vid so I had to hall ass to her will het it up soon

[joeysmith]

Originally Posted by madtom421

Did this problem start happening after you installed your bak and coil plate? If so then i would think you might have pinched one of the hoses to your lcv.

No it was doing that before I ever did it . And after I moved every thing it was better and now no

[joeysmith]

Originally Posted by Mike7202

also seems as if your idle is a bit low. does it stay at 750? bump it up about 150rpms. some people run theirs at about 1000 but mine throws a code if i run it that high. 900 is my max

No when it starts its low but as it get hot it goes up I have moved the idel up to 900rpm

[joeysmith]

And as I start it I smells like fuel bad as I am trying to start . And I did notes it got harder after I put the fuel pak on to

[LeaderDuece]

Originally Posted by joeysmith

No when it starts its low but as it get hot it goes up I have moved the idel up to 900rpm

Did you just now move the idle up? Cuz it sounded way slower than 900 in your clip.

If you just now moved it up, how does it start now that you moved it?

[Luv2LafMcc]

Originally Posted by joeysmith

it got harder after I put the fuel pak on to

Whats a Fuel pak?

[Mike7202]

Originally Posted by LeaderDuece

Did you just now move the idle up? Cuz it sounded way slower than 900 in your clip.

If you just now moved it up, how does it start now that you moved it?

i think he is saying that when he first starts it, the idle is slow...but as it heats up the idle increases, so by the time it is warmed up the idle is at 900


I still dont think the LCV is the problem because there shouldnt be a hot start problem if the lcv is bad. he is in a warm enough climate where he shouldnt even need and LCV all year long.

sounds like he is waayyyyy too rich on start up. dont know enough about the fule pak to know if that has a startup setting

[active1951]

If it is spark problem, it will smell like gas until spark is good, then it will start.
Did you check connections under tank etc?
.
.

[yamaweezle]

Originally Posted by joeysmith

And as I start it I smells like fuel bad as I am trying to start . And I did notes it got harder after I put the fuel pak on to

Why is this the first time we've read this??? Alright, I'm switching theories, and I'm on board with Mike7202...What kind of fuel processor is it?

[joeysmith]

Originally Posted by LeaderDuece

Did you just now move the idle up? Cuz it sounded way slower than 900 in your clip.

If you just now moved it up, how does it start now that you moved it?

It has been set at 900 for the last 6mo so have not done any thing to it