FREE transfer case tool from Yamaha!!!
After struggling to open the transfer case fill hole with a large washer, 50 cent coin (not thick enough), screw driver, crow bar, shovel, etc, I looked into all the junk I have removed from the bike over the years and voila!!! Best part is....FREEEEEEEEEEEE
Part #41: STAY 2, 5PX-14414-01-00
It has the perfect curve and thickness (allows it to stay put and not slip off), comes with a handle and even a hole for leverage
How to use the" tool" best:
1. Insert wider side into slit and hold it straight and tight against it with right hand.
2. Insert a screw driver for extra leverage into the middle hole with left hand and twist.
It goes to show you.....never throw away any stock parts....you never know when they would come in handy.
Part #41: STAY 2, 5PX-14414-01-00
It has the perfect curve and thickness (allows it to stay put and not slip off), comes with a handle and even a hole for leverage
How to use the" tool" best:
1. Insert wider side into slit and hold it straight and tight against it with right hand.
2. Insert a screw driver for extra leverage into the middle hole with left hand and twist.
It goes to show you.....never throw away any stock parts....you never know when they would come in handy.
