Road Star Warrior Forum : Yamaha Star Warrior Forums - View Profile: arizonawarrior

arizonawarrior arizonawarrior is offline

Super Moderator

Visitor Messages

Showing Visitor Messages 1 to 10 of 99
  1. umpire3
    04-05-2014 12:47 PM - permalink
    umpire3
    Hi Mike,

    Thanks for contributing to my low compression test values (http://www.rswarrior.com/forums/13-t...ification.html).

    I warmed up the bike and measured the difference in pressure when synchronizing the throttle bodies. To my surprise they are off by 14 mm. More astonishing is: I can't close that gap using the air screw on throttle body #2 (front cylinder). In fact, I can't affect it at all (close it all the way or 3 turns out from full stop).

    The access points are as described in the manual on page 3-15. I use mercury sticks.

    Does this mean I'll have to adjust the butterflies like they do on multiple carb bikes? Or, do you have another suggestion?

    Thanks,
    Robert
  2. tribalMR2
    02-24-2014 06:17 PM - permalink
    tribalMR2
    Mike,

    Thank you. The badge is definitely neat.
  3. Singo
    02-22-2014 01:11 PM - permalink
    Singo
    Thanks, still trying to find my way around the forum and how to do stuff on here, its new to me
  4. AKA AARON
    02-14-2014 02:06 AM - permalink
    AKA AARON
    Thanks i will check it out.
  5. AKA AARON
    02-12-2014 12:37 PM - permalink
    AKA AARON
    Have you ever tried a 200/55/17 on your warrior?
  6. Andy W
    10-18-2013 05:02 PM - permalink
    Andy W
    No problem in the slightest &, really no need to send me any money, but I thank you again for the thought!
    Your plate will look better than mine...I'm a slack sod & never polish anything, ha ha!
    Best regards, Andy.
  7. arizonawarrior
    09-17-2013 12:36 AM - permalink
    arizonawarrior
    The PCiii-USB and PC-V are imo superior, so do the related mods you want on your bike then spend the $300 on a dynotune at a Power Commander approved shop. The CVT is fine for cruiser performance but it lacks punch for hot rodding.
  8. umpire3
    09-16-2013 06:54 PM - permalink
    umpire3
    Hi Mike,

    I've been reading " Cobra Fi2000 PowrPro CVT Tuner" and with JP Cycles selling them for $300 I thinking of getting one. Currently, I have PCIII. The bike ('07 with Bub pipes and stock intake) runs strong. The previous owner only had it for 4 months. He bought it from a dealership. The workmanship of the mods looks well done.
    Anyway, I pulled one plug from each cylinder and saw the plugs were black. I really don't want to mess the map on a PCIII. So, my question is: Are you still running with the Cobra and its new board? Would you recommend the Cobra?

    Thanks,
    Robert
  9. umpire3
    09-15-2013 07:40 PM - permalink
    umpire3
    Hi Mike,

    Got another Warrior a couple of days ago. It has a DynoJet PC III w/USB. From the looks of the spark plugs I may have to do some adjustments. I don't have the USB link. From the looks of the USB on the PC it may be a female Micro-B connector. Can you clarify?

    Thanks,
    Robert

    Google Image Result for http://www.leadsdirect.co.uk/images/technical/usb%20receptacles.gif
  10. rumblemonkey
    08-25-2013 01:34 PM - permalink
    rumblemonkey
    Hello, sorry I did not get back-nothing happened with this! Changed fuse, reset codes (no warnings) have had no problems with it! Looked over ALL wiring, nothing showing up..weird...Thanks!

About Me

Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: Today 03:58 AM
  • Join Date: 01-28-2005
  • Referrals: 0

Friends

Showing Friends 1 to 10 of 128

All times are GMT -4. The time now is 10:46 AM.


Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0