Cruiser Performance 1.5" Punisher Pullback bars from Phat
Churchkey's V-BAK & AIS blockoffs
Yamaha Speedstar
2-1-2 Exhaust
Yamaha chrome billet MC cover ball milled
Huge tribal skull key from EZG123 (it's beyoootiful)
Removed passenger seat strap
Yamaha rear inner fender relocator
All reflectors ditched
Smoked f/r turn signal light covers (Custom Dynamics)
1.85" Amber LED clusters installed in rear signal housings(Custom Dynamics)
Barnett clutch and Progressive rear spring (from Phat Performance)
Chromed passenger peg relocation brackets(Fairmont Electroplating, Edmonton ,Alberta)
Chromed switchboxes and clutch perch(thanks to Tim @ Metric-magic.com)
Kuryakyn Iso Flame gripsinstalled (Phats)
Kuryakyn chromed levers installed(Phats)
Installedbraided lines, new handlebars Punisher pullback from CP
new right side cover installed July29/07
Corbin Stinger seat
BLUE ledsinstalled June 11, courtesy
www.plasma-leds.com and www.radiantrides.com
Yamaha passenger footpeg relocation brackets (Motorsports Superstore)
Lightning Performance 3" relocation brackets (Phat Performance Parts)
Yamaha billet swingarm pivot covers, smooth
-Barons Enferno floorboards installed on bike(Waited 6 months for these from Barons!)
-Pirelli Diablo 240 - 40 -18" rear tire, Diablo Strada 120 - 70 - 17" front tire, Bayside Performance, Vancouver B.C.
-PCIII installed May 14/08
-'99 R1 front end installed (May 21/08)
-260 swingarm installed (May 22/08)
-Coil and sensor plate installed May 22/08
-Carrozzeria V-Star wheels 17 x 3.5" and 18 x8.5"
(thanks to Micke for the idea, Thom(MDFD warrior) for the advice and help, and to Bill at Wildbros.com)
-blue anodized titanium fasteners for caliper mounts, fork/tree pinch bolts(tastynuts.com),natural titanium bolts for passenger peg relocation brackets(from Mark @ corsemeccanica.com)Gradually replacing all fasteners with titanium as funds allow.
-Brakeaway cruise control
- Custom "kanji" front pulley cover courtesy of bucky685
- 70 tooth x 1-1/2" custom rear pulley to match Carrozzeria wheels, pending chrome hardware, installed July 2009
-Baron's Road Star 31 tooth pulley coming for 1.5" belt conversion.
-Billet ball milled Yamaha shift and brake levers(installed April 09)
-Yamaha Billet ball-milled fork covers installed on R1 Forks May 5/09
-Yamaha Speedstar exhaust re-installed until I can dyno/re-map the bike
-Road Star 33t front pulley installed
-Dyna DC2-1 coils, Taylor wires
-Avon 240/40 ZR18" Cobra tire rear/AV56 Storm 120/70 ZR17" front
-side mount plate holder installed (thanks Justice Designs!)
-FSD Dual Hot Rod Slashed exhaust shipped June 11/10
-YBT-14 BS battery to replace stocker. It's dead like Elvis. 210 CCA makes it hotter than blue suede shoes!!!
-Fuel pressure regulator relocated under tank (thanx AlanH, jschram and others for info!)
-hidden rear caliper from Jim Zahorik(crown) to go with 240 when re-installed.
- Stealth mounted Stebel magnum horn under left side AIS cover(FINALLY!!!)
Visitor Messages
Quote-(FSD pipes generating a bunch of noise bylaw fines!
),,**** thats right ,AB,is handing fines out for the noise bylaw, helmets and ape hangers.ya going to sell frankies pipes on ebay?......they looked nice....
