Oil Leak - Road Star Warrior Forum : Yamaha Star Warrior Forums

Reply
 
LinkBack Thread Tools
Old 07-21-2019, 04:35 PM   #1 (permalink)
Member
 
cagobelo1's Avatar
 
Join Date: Jan 2003
Location: California
Posts: 35
Default Oil Leak

Hello,
I was hoping that you can give your advise on the leak from the oil filter.
I did oil change and used Bosch #3323 filter. After a few days I found a leak between the oil filter and housing. I installed a new filter but very next day, there was a oil puddle under the bike.
Should I go back to original Yamaha filter? I didnít see any residue on the wall where filter sits. Do I need to replace the oil filter housing? Thank you!
cagobelo1 is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 07-21-2019, 04:53 PM   #2 (permalink)
Senior Member
 
Desertboy13's Avatar
 
Join Date: Aug 2012
Location: COACHELLAVALLEY
Posts: 6,143
Default

A while back ago.
There was a issue with those filters not being concaved enough with cause the filters not to be flush to the housing and there for causing a small leak.

You can pull the filter and tap the center with a hammer and that should solve the problem

Sent from my SAMSUNG-SM-J327A using Tapatalk
Desertboy13 is offline   Reply With Quote
Old 07-21-2019, 06:38 PM   #3 (permalink)
Senior Member
 
rij1's Avatar
 
Join Date: Sep 2013
Location: From Whittier,California Live in Ventura,California
Posts: 2,400
Default

I think I figured out the problem with the Bosch 3323 filters.
From all my oil changed I have used these for 2 different bikes and until last year have always used the red and black labeled 3323 which never gave an issue.
I bought a new 3323 but with a white label and it didn't seal correctly.
I fixed that issue. I compared the new (white label) and old (black label) filters and they were different just on the head where it screws to the bike. I have to find my pics to compare but I think there's 2 types of these 3323 filters wether there miss stamped or produced to be that way.
I also found that there's a ST3323 (white label)with the same specs but about 1/4 shorter but have the correct concave head that seals right.

Omar, what color was the label on the filter we put on yours?
Attached Thumbnails
Click image for larger version

Name:	20180823_125951.jpg
Views:	44
Size:	167.5 KB
ID:	216550   Click image for larger version

Name:	20180823_130011.jpg
Views:	43
Size:	90.9 KB
ID:	216552   Click image for larger version

Name:	20180823_130007.jpg
Views:	42
Size:	113.9 KB
ID:	216554   Click image for larger version

Name:	20180914_125122.jpg
Views:	44
Size:	114.3 KB
ID:	216556   Click image for larger version

Name:	20180823_130021.jpg
Views:	42
Size:	127.9 KB
ID:	216558  

Click image for larger version

Name:	20180823_130016.jpg
Views:	44
Size:	210.2 KB
ID:	216560   Click image for larger version

Name:	20180914_200905.jpg
Views:	45
Size:	57.6 KB
ID:	216562   Click image for larger version

Name:	20180914_200858.jpg
Views:	41
Size:	64.8 KB
ID:	216564   Click image for larger version

Name:	20180914_200915.jpg
Views:	43
Size:	75.9 KB
ID:	216566  
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

2002 XV1700 Roadstar Warrior
My Mods
Cobra Fi2000 PowrPro with CVT(Non-Black)
Bub Chambermaids
Big City Thunders - Thunder Monster Baffles

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Riding On the Darkside #2 (235/45/ZR17 BFGoodrich G-Force Comp-2 A/S)

Rudy Jeremias
(562)303-6036
rij1 is offline   Reply With Quote
 
Old 07-21-2019, 10:24 PM   #4 (permalink)
Senior Member
 
Desertboy13's Avatar
 
Join Date: Aug 2012
Location: COACHELLAVALLEY
Posts: 6,143
Default

I'm not sure which color tag..
I'll check n post up..
Also remember Rudy when we did the oil change we went with the taller filter

Sent from my SAMSUNG-SM-J327A using Tapatalk
Desertboy13 is offline   Reply With Quote
Old 07-22-2019, 12:14 AM   #5 (permalink)
Senior Member
 
rij1's Avatar
 
Join Date: Sep 2013
Location: From Whittier,California Live in Ventura,California
Posts: 2,400
Default

Quote:
Originally Posted by Desertboy13 View Post
I'm not sure which color tag..
I'll check n post up..
Also remember Rudy when we did the oil change we went with the taller filter

Sent from my SAMSUNG-SM-J327A using Tapatalk
I'm pretty sure we opened the box and looked at the head to make sure it is the right one or did I hit the center down? I don't remember. Yes, the 3323 Is the taller one.
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

2002 XV1700 Roadstar Warrior
My Mods
Cobra Fi2000 PowrPro with CVT(Non-Black)
Bub Chambermaids
Big City Thunders - Thunder Monster Baffles

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Riding On the Darkside #2 (235/45/ZR17 BFGoodrich G-Force Comp-2 A/S)

Rudy Jeremias
(562)303-6036
rij1 is offline   Reply With Quote
Old 07-22-2019, 01:04 AM   #6 (permalink)
Super Moderator
 
arizonawarrior's Avatar
 
Join Date: Jan 2005
Location: Reno Nevada and Rogue River Oregon
Posts: 27,264
Blog Entries: 4
Default

I recently bought 2 spares for my shelf. I just looked at them. They are white labeled. Dammit.

So it seems it only leaks when warm or under pressure. Once parked it will drip until if cools. Is that right?

I'm certain Bosch will not give any helpful info, I suspect I need to shop my local area and open the boxes in hope's of finding the red painted logo on the black body. It has adequate concave distance for the o-ring to seal before the thread bottoms out.

Thank you for posting this

Crazy.
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Last edited by arizonawarrior; 07-22-2019 at 01:10 AM.
arizonawarrior is online now   Reply With Quote
Old 07-22-2019, 01:10 AM   #7 (permalink)
Senior Member
 
rij1's Avatar
 
Join Date: Sep 2013
Location: From Whittier,California Live in Ventura,California
Posts: 2,400
Default

Quote:
Originally Posted by arizonawarrior View Post
I recently bought 2 spares for my shelf.
I just looked at them. They are white labeled.
Dammit.

I'm certain Bosch will not give any helpful info, I suspect I need to shop my local area and open the boxes in hope's of finding the red painted logo on the black body. It has adequate concave distance for the o-ring to seal before the thread bottoms out.

Thank you for posting this

Crazy.
Did you have a look at them comparing the head to the black labeled one?
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

2002 XV1700 Roadstar Warrior
My Mods
Cobra Fi2000 PowrPro with CVT(Non-Black)
Bub Chambermaids
Big City Thunders - Thunder Monster Baffles

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Riding On the Darkside #2 (235/45/ZR17 BFGoodrich G-Force Comp-2 A/S)

Rudy Jeremias
(562)303-6036
rij1 is offline   Reply With Quote
Old 07-22-2019, 04:04 AM   #8 (permalink)
Super Moderator
 
arizonawarrior's Avatar
 
Join Date: Jan 2005
Location: Reno Nevada and Rogue River Oregon
Posts: 27,264
Blog Entries: 4
Default

Yes. The white labeled ones seem flatter and more shallow than I am accustomed to seeing.
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
arizonawarrior is online now   Reply With Quote
Old 07-22-2019, 09:48 AM   #9 (permalink)
Senior Member
 
Desertboy13's Avatar
 
Join Date: Aug 2012
Location: COACHELLAVALLEY
Posts: 6,143
Default

Hey Rudy..
We opened the box up @ parts store to make sure we had a good one...

Sent from my SAMSUNG-SM-J327A using Tapatalk
Desertboy13 is offline   Reply With Quote
Old 07-26-2019, 09:50 AM   #10 (permalink)
Super Moderator
 
arizonawarrior's Avatar
 
Join Date: Jan 2005
Location: Reno Nevada and Rogue River Oregon
Posts: 27,264
Blog Entries: 4
Default

I sent a request on Bosch website describing the trouble and asking if there is any awareness of old stock 3323 filters. Obviously I will not receive a helpful reply, if any. I had a few minutes to start investigating oil filters again, been awhile. I need to return the two spares I bought. Ugh.

Has anyone looked at oil filter media and construction and bypass valve numbers recently?
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
arizonawarrior is online now   Reply With Quote
Sponsored Links
Advertisement
 
Reply

  Road Star Warrior Forum : Yamaha Star Warrior Forums > Warrior Forums > Frequently Asked Warrior Questions

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 05:56 AM.


Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
RSWarrior.com is an independent Yamaha enthusiast website. Content on RSWarrior.com is generated by its users and RSWarrior.com is not in any way affiliated with Yamaha Motor Corporation, U.S.A.