Road Star Warrior Forum : Yamaha Star Warrior Forums

Road Star Warrior Forum : Yamaha Star Warrior Forums (https://www.rswarrior.com/forums/)
-   Classifieds - Wanted (https://www.rswarrior.com/forums/27-classifieds-wanted/)
-   -   WTB black or chrome handlebar accessories (levers/housing) (https://www.rswarrior.com/forums/27-classifieds-wanted/248090-wtb-black-chrome-handlebar-accessories-levers-housing.html)

Ama 05-21-2015 08:32 PM

WTB black or chrome handlebar accessories (levers/housing)
 
So I'm looking for chrome or black levers, mc top housing (want to get rid of the warning nonesense) switch housings for both sides or anything to do with the handlebars. Let me know what you guys got or if you guys know of any places that sell quality aftermarket products. No plastic or garbage like that.

Ama 05-21-2015 08:41 PM

Anyone familiar with which one of these will fit and what the quality is like?
Electronics, Cars, Fashion, Collectibles, Coupons and More | eBay

LeaderDuece 05-21-2015 09:13 PM

599 Attachment(s)
I have some polished housings I would sell you. The MC top is actually a common size, and you can get it on eBay for less than 20 bucks.

Dunecraz 05-21-2015 09:16 PM

194 Attachment(s)
I asked the same question.

https://www.rswarrior.com/forums/13-t...-question.html

Based on replies I received I opted to pass on the ebay ones and bought the show chrome P/N 81-110. I finally installed the show chrome ones I bought just the past couple of weeks. They do appear to be really nice quality.

Ama 05-21-2015 09:21 PM

Quote:

Originally Posted by LeaderDuece (Post 3180282)
I have some polished housings I would sell you. The MC top is actually a common size, and you can get it on eBay for less than 20 bucks.

I feel like a chrome top to the mc would look silly if the rest isn't chrome.. I asked the guys on facebook and it looks like phats has the right size and quality housing covers, too bad they're Damm near 100 bucks..

Ama 05-21-2015 09:22 PM

Quote:

Originally Posted by Dunecraz (Post 3180290)
I asked the same question.

https://www.rswarrior.com/forums/13-t...-question.html

Based on replies I received I opted to pass on the ebay ones and bought the show chrome P/N 81-110. I finally installed the show chrome ones I bought just the past couple of weeks. They do appear to be really nice quality.

Yeah funny I was actually the first to respond to your post. How was the install ? Did you get the housing from phats?

Dunecraz 05-21-2015 09:25 PM

194 Attachment(s)
Also if you do remove either of the rocker switches be very careful installing them back into place. There is a pin that can be easily broken as I found out.

https://www.rswarrior.com/forums/27-c...ll-switch.html

Dunecraz 05-21-2015 09:33 PM

194 Attachment(s)
Quote:

Originally Posted by Ama (Post 3180306)
Yeah funny I was actually the first to respond to your post. How was the install ? Did you get the housing from phats?

Hahaha, Yeah I noticed your post. I actually bought them from powersportsuperstore.com in January 2014. I paid $84.88 back then and $11.99 S&H but I had other stuff shipped with them at the same time.

I had to grind the alignment pins off as my CP1120 Bars did not have holes drilled in them. No big deal, and they seem to hold real tight on the bars even after the grinding. Installation wasn't bad, it was the internal wiring that was a pain.

Dunecraz 05-21-2015 09:48 PM

194 Attachment(s)
Couple of pics.


Are you planning on internally wiring? I was able to route my wires from the inside of the housings straight into my bars since the housings sat directly over the holes in my bars. Super clean look. The only thing I'm concerned about is the recessed cutout at the front of the housings that is left wide open since the wiring harness is not ran through there anymore. The only thing I can think of is putting a small amount of silicone in the cutout to help keep water from getting in there.

Ama 05-21-2015 10:02 PM

I have the tall billet risers and flat bar so no internal wiring thankfully.. Wish there was a step by step someone put up here for these covers. How do they come apart? Is this going to take a while for me to take apart and then reinstall? how does it work with the stock internals? Also do you have chrome levers i can see there? I need everything thats aluminum/grey on my bike to go away asap i hate it


All times are GMT -4. The time now is 12:46 PM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.