Road Star Warrior Forum : Yamaha Star Warrior Forums - View Single Post - Exhaust Stud, Nut and Bolt specs?
View Single Post
Old 10-10-2019, 11:26 AM   #6 (permalink)
Senior Member
freeezzzz's Avatar
Join Date: Nov 2017
Location: Moscow, Russia
Posts: 281

Yes, it 8x1.25 and 50mm long.

Tried to use stainless steel bolts. Broke 2 out of 4. One on each cylinder. On one, I managed to unscrew it by hammering a torx bit into it. Just in front of the frame. That was lucky.

On the second, I was possible to remove the receiving part of the tube by unscrewing it from the cylinder and the bolt was brutally drilled.

Now I do not use stainless bolts or bolts from solid types of steel. Now I use studs, as installed at the factory and copper / bronze nuts on one cylinder, and ordinary steel screws on the second cylinder.
Burn the Guzzolene!
Burn the tires!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Last edited by freeezzzz; 10-10-2019 at 11:42 AM.
freeezzzz is offline   Reply With Quote