Road Star Warrior Forum : Yamaha Star Warrior Forums

Road Star Warrior Forum : Yamaha Star Warrior Forums (https://www.rswarrior.com/forums/)
-   Items on eBay Craigslist and Similar (https://www.rswarrior.com/forums/50-items-ebay-craigslist-similar/)
-   -   cool new mod (https://www.rswarrior.com/forums/50-items-ebay-craigslist-similar/183148-cool-new-mod.html)

joeysmith 11-13-2012 12:35 PM

cool new mod
 
this looks cool for them dont want a finder on there bike .
Yamaha RoadStar Warrior Seat Taillight Conversion Headlight Angel Halo Eye Kit | eBay

07midnight57 11-13-2012 12:59 PM

One good bump or pot hole and that is toast.

LeaderDuece 11-13-2012 01:30 PM

599 Attachment(s)
It wasn't even straight.

And to use the halo you have to cut your headlight apart.

Luv2LafMcc 11-13-2012 01:58 PM

How would you see this halo light?? Our bikes headlights are always on when the bike is running... i wouldn't want it to be off, as I like being "seen" by others [cars]. Not only would cutting into and resealing the headlamp probably ruin the reflective geometry, the halo ring would block it out also.

not as much of an issue against the fender-less seat light, but not my cup of tea.

Thanks for bringing to our attention Joey, its nice to at least see people trying to think outside the box.

LeaderDuece 11-13-2012 02:10 PM

599 Attachment(s)
Looks like this:

Motorcycle Halo Kit, HID Kit, Sportbike HID Light | NiceCycle.com

http://a248.e.akamai.net/origin-cdn....KIT%2045-2.jpg


You can still have both lights on. I think JBat did one...

christok 11-13-2012 02:31 PM

Hate to see what his back looks like after riding 5 minutes in the rain and eventually i would think that the seat pan will crack and break or the bracket up front will let go and i would hate to be sitting on the bike or should i say road after that happens.

parkinglot 11-13-2012 09:34 PM

My old man has a small 250cc cruiser that he runs 5 miles back and forth to work. He put the halo in white and hooked it to the high beam lead off the headlight plug. He runs it during the day without the incandescent low beam to help save the battery as all his sshort trips by the end of the week his battery needs charged. I though it was a great idea

rquest 11-13-2012 09:42 PM

I'm with those who think after a few bumps it'd be torn off and personally I don't care for the Idea of driving a bike without a R. Fender but, It is a lot of stuff for $60. I put a push/pull switch on the lead to my headlight so it can run the riding light or the headlights.

Jbat 11-13-2012 09:57 PM

236 Attachment(s)
LD is right, I did one of those and just wired it to the high beam side because it had a shitty little halogen on the high beam when I installed my HID. So now I have a HID on the low beam side and the halo ring on high beam


Sent from my iPhone using Motorcycle.com App

LeaderDuece 11-13-2012 10:09 PM

599 Attachment(s)
How much additional light does it provide JBat, and how hard was it to cut open and glue back together?


All times are GMT -4. The time now is 07:46 PM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.