Joined
·
99 Posts
-
Warrior of the Quarter Challenge - Spring! Enter your bike HERE
Joined
·
1,879 Posts
You can see all the details here:
http://www.flickr.com/photos/yqed/sets/72157622622236397/
My goal was to make the tank stretch nice, without seeing the break lines where the extra cone was added. It might help you... I noticed that many people stretched their tanks, after I did mines. My tank was done by BMS, who pioneered this mod. There is no plastic added, just pure raw metal english wheeled to match a perfectly curved shape... so it will never crack. The curved shape is very hard to get, I had to call BMS several times until they finally matched the shape I wanted. Check the pics above for details. The tank lip was removed as well the vent lines. I also added their gas cap. This is not the cheap gas cap that gets stuck, it is heavy duty built. I think I'm no. 3, with a Warrior stretched tank like that. First was the BMS Warrior, then another guy (I can't remember the username), then myself.
http://www.flickr.com/photos/yqed/sets/72157622622236397/
My goal was to make the tank stretch nice, without seeing the break lines where the extra cone was added. It might help you... I noticed that many people stretched their tanks, after I did mines. My tank was done by BMS, who pioneered this mod. There is no plastic added, just pure raw metal english wheeled to match a perfectly curved shape... so it will never crack. The curved shape is very hard to get, I had to call BMS several times until they finally matched the shape I wanted. Check the pics above for details. The tank lip was removed as well the vent lines. I also added their gas cap. This is not the cheap gas cap that gets stuck, it is heavy duty built. I think I'm no. 3, with a Warrior stretched tank like that. First was the BMS Warrior, then another guy (I can't remember the username), then myself.
Joined
·
1,493 Posts
Report