RS Warrior Forum banner
Cancel
  • ONE WEEK LEFT!! Voting Now Open for the Warrior of the Quarter Challenge! Vote HERE
Add bookmark
Sensitive content, not recommended for those under 18

oh ya one more dont tell the gf shell kill me

  • 0
  • 1
this is a mock up of the 1/8 steel bracket that hold s the bags on with the left side being the far back bolt of the harley bags thats free floating b

this is a mock up of the 1/8 steel bracket that hold s the bags on with the left side being the far back bolt of the harley bags thats free floating b

  • 0
  • 0
stainless steel T bar style hose clamps with like 1/8 rubber piece between fork tube and clamp for viration and anti scratch. welded a little piece of

stainless steel T bar style hose clamps with like 1/8 rubber piece between fork tube and clamp for viration and anti scratch. welded a little piece of

  • 0
  • 0
wrap around leds smoke tubes way bright 37 bucks works awsome cheap highly recomended been on there 2yrs now!

wrap around leds smoke tubes way bright 37 bucks works awsome cheap highly recomended been on there 2yrs now!

  • 0
  • 0
another front view the small scres originally screwed into headlight rig on the inside but theres so much viration and wind flex it stipped them out i

another front view the small scres originally screwed into headlight rig on the inside but theres so much viration and wind flex it stipped them out i

  • 0
  • 0
front view i wanted the fairing as high as possible to avoid tall ass windshield thats why the headlight is at the bottom of the circle and the top pa

front view i wanted the fairing as high as possible to avoid tall ass windshield thats why the headlight is at the bottom of the circle and the top pa

  • 0
  • 0
another view of handlebar stay detailed in other pic

another view of handlebar stay detailed in other pic

  • 0
  • 0
i ran the bike with the front fairing for 6 months before i added these over 100mph it flexed to much scared me and these dont look to bad there actua

i ran the bike with the front fairing for 6 months before i added these over 100mph it flexed to much scared me and these dont look to bad there actua

  • 0
  • 0
you can see the extra clamps i added for upper support

you can see the extra clamps i added for upper support

  • 0
  • 0
all lit up from seat

all lit up from seat

  • 0
  • 0
view from seat 2 toggle switched are for the amp witch kills all sound and the right is for the charger for the mp3 i basically never take it out now!

view from seat 2 toggle switched are for the amp witch kills all sound and the right is for the charger for the mp3 i basically never take it out now!

  • 0
  • 0
front fairing if you look close you can see the aluminum plate in the middle of the fairing. was all cut out and mocked up this aluminum plate thats n

front fairing if you look close you can see the aluminum plate in the middle of the fairing. was all cut out and mocked up this aluminum plate thats n

  • 0
  • 0
passenger side of pipe that goes to underside of bag

passenger side of pipe that goes to underside of bag

  • 0
  • 0
another passenger peg pipe picture

another passenger peg pipe picture

  • 0
  • 0
close up of how pipe ataches to pasenger peg bracket!

close up of how pipe ataches to pasenger peg bracket!

  • 0
  • 0
right side passenger peg pipe going to underside of bags also new floorboards for the lady! there aftermaket for a goldwing flip up 150 bucks. easy mo

right side passenger peg pipe going to underside of bags also new floorboards for the lady! there aftermaket for a goldwing flip up 150 bucks. easy mo

  • 0
  • 0
pipe from left passenger peg to underside of harley bags inside wheel well shot

pipe from left passenger peg to underside of harley bags inside wheel well shot

  • 0
  • 0
right side from passenger peg to factory pipe grommets on underside of harley bags

right side from passenger peg to factory pipe grommets on underside of harley bags

  • 0
  • 0
inside pipe from triangle down

inside pipe from triangle down

  • 0
  • 0
another underside view

another underside view

  • 0
  • 0
underside of bags were the 3 inch piece ties the 2 pipes togeather the one from the passenger pegs to the one that dropes down from the triangle piece

underside of bags were the 3 inch piece ties the 2 pipes togeather the one from the passenger pegs to the one that dropes down from the triangle piece

  • 0
  • 0
inside can see were i slit pipe and slide it onto triangle welded both sides

inside can see were i slit pipe and slide it onto triangle welded both sides

  • 0
  • 0
IMG 2251

IMG 2251

  • 0
  • 0
IMG 2246

IMG 2246

  • 0
  • 0
IMG 2244

IMG 2244

  • 0
  • 0
jracer00

warrior bagger

There are no comments to display.

Album information

Album owner
jracer00
Date created
Item count
36
View count
323
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

jracer00

jracer00

Media items
36
Albums
1
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top