RS Warrior Forum banner
1 - 6 of 6 Posts

·
[Retired Admin-SuperMod]
Joined
·
30,724 Posts
Could you please post the Baron's part number for the 2k used31 tooth aluminum pulley you are selling?


In case helpful, Baron's has made their BA-6521RD 31-tooth pulley steel now. They did it because the aluminum teeth roll-over or wear just a hint, and its enough to cause excessive belt tooth wear resulting in a condition where the faces of the belt teeth can't grab the face of the pulley teeth well enough. This causesbroken belts, so if you have the aluminim Baron's 31-tooth you might want to be aware you could beselling someone a problem. The change to steel can be confirmed by looking at the newest install sheet, there's a link to it here: https://www.baronscustom.com/catalog/display/533/index.html
 

·
[Retired Admin-SuperMod]
Joined
·
30,724 Posts
This is all I could get from Baron's:




Sorry, we do not sell an aluminum 31-tooth pully.
Rudy




Sent: Saturday, October 18, 2008 6:06 PM
To: [email protected]
Subject: BA-6521RD
Is BA-6521RD steel as the instruction sheet indicates?


Do you still sell an Aluminum 31-tooth pulley for the RSWarrior?

Thanks.
 
1 - 6 of 6 Posts
Top