[arizonawarrior]

In case you cannot find what you want, you can make one or have it made locally. If the coil holes are made 1mm larger in all directions then DC2-1's fit (keep screw holes the exact same though). One if these plates might already be oversized, the dimensions shown would reveal that.

Jump to Documentation forum:

Warrior Modifications How-To: Intermediate

This area is a storehouse for Intermediate Modification help screens. 1. This Table of Contents 2. Rear Suspension, Fixed and Adjustable Lowering Links. 3. Lighting, Click-of-Death (COD) and Signal Fast-Flash. 4. Rear Suspension Spring (Options). 5. Rear Suspension Shock Absorbers 2002 vs 2003...

www.rswarrior.com

 

[zswarrior]

In case you cannot find what you want, you can make one or have it made locally. If the coil holes are made 1mm larger in all directions then DC2-1's fit (keep screw holes the exact same though). One if these plates might already be oversized, the dimensions shown would reveal that.

Jump to Documentation forum:

Warrior Modifications How-To: Intermediate

This area is a storehouse for Intermediate Modification help screens. 1. This Table of Contents 2. Rear Suspension, Fixed and Adjustable Lowering Links. 3. Lighting, Click-of-Death (COD) and Signal Fast-Flash. 4. Rear Suspension Spring (Options). 5. Rear Suspension Shock Absorbers 2002 vs 2003...

www.rswarrior.com

Hey Arizonawarrior, the directions for the one listed are a bit difficult to follow along with, there’s no degree angles or anything.

I’ve heard in the forum of Bill1943’s diagram, does anyone have the link?