RS Warrior Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
394 Posts
Discussion Starter #1
Hey all, I am interested in the CPH-1100 bars, 6" rise and6" pullback. These are listed on cruiser performance's website on the v-star 650 page ( http://www.cruiserperformance.com/vstar_bars1.html). My question; has anyone installed these on thier warrior and were there any problems, particulary with the bars or your hands hitting the tank? Any info would be appreciated and pics would garner my highest admiration.
 

·
Registered
Joined
·
394 Posts
Discussion Starter #3
Arizona Warrior said:
Compare the pullback rise and width to the stock bars, which are listed under 'handlebars' in the Popular Mods post (Technical forum). That should help determine most of the answers.


Those are nice looking bars.

I have done so more or less and it seems like at full turn the bars are going to be pretty close to the tank. I think when I get home tonight I am going to bend up a coat hanger to the approximate dimensions of those bars and see how that looks.
 

·
Registered
Joined
·
691 Posts

·
Registered
Joined
·
394 Posts
Discussion Starter #5
mxjrb_651 said:
Datman has the 1120'si believe and has no issues hitting and they have longer pull back


http://rswarrior.com/forums/p/118604/958687.aspx#958687


http://www.flickr.com/photos/flet/2862228094/in/set-72157607316076014/


I am in the process of checking to see if this brand fits on the warriors too. I could possibly get these at a better deal if you were interested.


http://www.burlybrand.com/dragbars/B28-4017.html

I was under the impression that the 1120's had 8" rise, no? The other bars you linked look pretty similar but I am pretty set on the 1.5" diameter.
 

·
Registered
Joined
·
1,490 Posts
speedkills said:
mxjrb_651 said:
Datman has the 1120'si believe and has no issues hitting and they have longer pull back


http://rswarrior.com/forums/p/118604/958687.aspx#958687


http://www.flickr.com/photos/flet/2862228094/in/set-72157607316076014/


I am in the process of checking to see if this brand fits on the warriors too. I could possibly get these at a better deal if you were interested.


http://www.burlybrand.com/dragbars/B28-4017.html

I was under the impression that the 1120's had 8" rise, no? The other bars you linked look pretty similar but I am pretty set on the 1.5" diameter.

Yeah, your right. The 1120's have an 8" rise. I've seen the pullback listed as 12" and 13". I'm not sure which it really is; I've never measured mine.
 
1 - 8 of 8 Posts
Top