i believe theyre just about the same.

however, with the integrated risers and the 'flat' bar, the feeling and illusion you get is quite different and much cooler.

you wont be disappointed. lately, ive considered going with Yamaha billet risers and a flat/flanders bar. i just wanted to be slightly more aggressive. however, just tonight, i narrowed me TT's by cutting 3/4" off of each end and it did the trick. brought my arms in a bit and seems a tad lower (not sure how thats possible, but thats what it feels like).

check out the Barons Radius bars too.

 

To me the TTs came back a little bit and are a bit lower. I like the more aggressive riding position since I molest the twisties with a sport bike vengeance[/emoticons/emotion-2.gif] The stock bars just seem awkward to me now and look goofy.[8D]

 

The tt bars pullback is 9.5 inches with 9.5 inches of rise & 34 inches wide. I think I read somewhere that the stock bars had almost 13 inches of pull back but I'm not posative. I have 2 sets of the Yami T bars, one is stock & one has 3 hole's drilled for internal wiring. $50 ea. Email me if interested.

 

Thx guys for this bit of info,
I should have been more specific on my info request,as far as why I wanted to know how far they pulled back vs.the stock bars.

Reason is,I want a set of bars that gives me about more pull back than my stock bars.I'm a heavy guy shall we say and a slight reach forward does a number on my myddle and lower back,So I'd prefer to be leaning back ever so slightly.I'm also getting a custom seat made from Pacific Coast Star that should lower 1 1/2" and posibly push back my sitting position by an 1".So I may need as much as 4" of Pull back but I'm not really looking for a super wide bar either,lol,not much more than the stock width neway.

Can any of you tell me if there's a particular bar,such as the flat bar's,plus a certain style riser that would give me that extra 2" to as much as 4" inchs pull back,and possible internal wiring ?

Thx agian for your info up till now,and in the future on this topic.

 

Cruiser Performance is advertising 1.5" T Bars on their website that I feel have great promise to pull back and look great. (Cruiserperformance.com) I have e mailed and called several times with no response. Does anyone have an update on delivey?