RS Warrior Forum banner
  • Voting Now Open for the Warrior of the Quarter Challenge! Vote HERE
1 - 10 of 10 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hey everyone! First time message. I am purchasing an 06 or 07 Midnight Warrior this Summer. Will get flat bars, but which pipes seem to sound the best? I would like them to turn down in front of the rear tire and be black. I have had seven bikes but never personalized any of them. The Warrior seems to beg for it. Any other easy mods to go with the pipes without breaking the bank? Thanks for the info in asvance. Also, is there any news out there about the 08 Warrior getting the larger motor from the Roadliner?
 

· Registered
Joined
·
2,838 Posts
quote:Originally posted by jefslick

Also, is there any news out there about the 08 Warrior getting the larger motor from the Roadliner?


Don't even start [/emoticons/emotion-2.gif]. It will never happen. The Warrior may or may not be going away next year, but I can promise you one thing, it wont get a bigger motor. The Roadliner motor wont fit in the frame. They would have to redesign the Warriors frame and that isn't going to happen.

Plus, why would they redesign the Warrior with a bigger motor to compete with the Roadliner.

Welcome to the forum [/emoticons/emotion-1.gif]. As far as your other questions go, read around on the forum. Most of what you have/will be asking has already been covered somewhere on here. I would start with the Frequently Asked Questions forum and go from there [/emoticons/emotion-5.gif]. Here is the link:http://rswarrior.com/forums/forum.asp?FORUM_ID=39

Take care,
Dave
 

· Registered
Joined
·
1,418 Posts
Find you some short pipes and wrap them. That, my friend, is cool. Most pipe will all cost around $600. Yes, there are soe higher and some lower. Go to the Motor Sport Super Store... the link is at the top right corner of the main page.
Ride safe bro.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top