I finally got around to installing the load equlizer on my bike. The front turn signals are stock, the rear are bullet. The lights still flash at light speed. I am positive I have the rear turn signal wires clipped into the equalizer correctly. What am I doing wrong? thx
Pwfyrcat1
I plugged mine to the connections for the rear signal lights that's under the ecu unit under seat. one purple wire to brown wire the other purple wire to green and black wire to black wire w/green dot.[/emoticons/emotion-5.gif]
Good luck.......
Chris
Good luck.......
Chris
You can bypass the guess work for the resitor you need. I just ran the original bulbs and hid them under the seat. You can even use the stock socket if you take it out of the chrome housing. Make a "Y" adaptor and you won't have to cut original harness. FYI I run LEDs front and rear turnsignals.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
