You could do what I did over the holidays and just gain a few extra pounds /emoticons/emotion-1.gif

Christian

 

I think bizmark offers a kit with threaded rods and hiem joints. check with him or frankenstien I think he has this kit on his ride.

 

The PCS kit should lower it a bit more.http://www.pacificcoaststar.com/pcs/prod_acc_w_loweringkit.htm
It replaces the stock dog bones with longer ones. Easy install.

 

I have the Baron's lowering kit and was very hapy with both the ease of install and the finished product. I don't know what the height difference is between the Baron's kit and the flip and grind but if the Baron's kit is lower, I would definately recommend it.

 

I have the Baron's lowering kit and was very hapy with both the ease of install and the finished product. I don't know what the height difference is between the Baron's kit and the flip and grind but if the Baron's kit is lower, I would definately recommend it.

 

I believe a couple of members have successfully combined the flip and grind with a PCS lowering kit and have gotten closer to the ground with it.

I have the PCS only and am happy enough with that.

 

Biz's kit let's you decide how high. The PCS is about 1 3/4 to 2" and you only have one option. Cool thing about Biz's is you have options.

 

I have the PCS lowering kit and mine dropped 1 3/4" at the seat. you can't see air under the fender anymore.

 

While we are on lowering and asking Biz ?'s, Will the 240 fit under a tricky lowered fender?