It is about time someone did this!

 

Hey Cmos9, ask them if they can do any quantity discounts. Even if they can't, please give us some contact info, so when we call we don't have to start from the beginning. I bet quite a few people from this forum would kill for this mod. I know I would. I have been holding on to an RG side mount license bracket for 6 months cause I can't find a turnsignal option that I like. This is the one I have been waiting for.

 

I've been waiting for this to come out since I plan to get rid of all the stock turnsignals. Just have to decide if I want to wait a couple of months for the internal system or get it now with the external box.

 

Check out their website. I called their 800 number and spoke with Michael.

http://www.flashalert.com/start.htm

They currently have a 10% xmas sale.

-Peter

 

Count me in on the group purchase deal.

 

Barons had a tail light/turn signal setup at the laughlin river run. What it consisted of was this. They clipped (it looked internal to the assy) about 2" off each end of the tail light and turned them into turn signals. It had a great look to it. I'v talked to barons about this but haven't recieved a answer of when/if/cost they are going to sell something (for the stock fender).

Does this tail light need a load resistor to keep the computer happy?

The Lab Man

 

****!
And I just put the crotch-rocket bugs-eyes on the back of mine. I had to drill holes in the fender, too. I should have waited a month.

Oh well. I guess mine will be brighter and more noticeable anyway.

 

Count me in on this! WOOOOHOOOO...I had nice Rizoma turnsignals but took'em off. Sheeeiit no one looks at them anyway. But for a 100 bucks I will mod mine to be more legal like.

 

Ok. Got my name on the list for the internal board. Wow...I am excited! Expected price is 109.00. If you want a core exchange it is 25 more or expected to be. Talked to Mike?...Nice guy. Very helpfull.

 

I have this kit on my ducati and as far as loading goes, the blinkers blink at the normal rate which indicated that they must imitate a bulb type load. No whether the load is enough for the computer is another story. (I will find out though)
-peter

 

Barons does not have a date for their taillight mod. He was talking about it in Springdale. I asked about it last month.

 

After someone gets theirs back and installed, please let us know how it works.

 

Hey, Someone call these guys and lets get a group rate. This can happen, all it takes is a phone call. Talk to Sales Manager or any Manager in Charge! I would call now, but I am at work. Group Discount could be worth anywhere from an extra 15%-25% off cost.

 

Here's an idea - SOMEONE POST THE FREAKING NUMBER - I will call tomorrow (Tues) during the day. I work from home and will call between pool games and mocha frappuccino's.

This is the mod that a lot of people have been waiting for. Unless your billh who makes his own LED brackets. /emoticons/emotion-5.gif

 

I shot Michael an Email today about group purchases... hopefully I will hear back tomorrow.

M. D. Wright, Inc.
4701 East 870th Road
Casey, IL 62420
Ph: 800-980-3517
Ph: 217-932-6485
Fax: 217-932-6486

 

And here's his web address:
http://www.flashalert.com/start.htm

 

Sounds like a great mod. I'm interested. How much of the tailight blinks as a turn signal... half? or maybe 1/3? Thanks.

BTW,Cmos9, what model Ducati do you have?

 

Generaly half will blink. I have a 2000 996 bip.
-peter

 

I sent him an email also! Hey, everyone shoot him an email. This way he will take notice. This is a definate mod to be done. Bartender give this guy a call! set this up for us!

 

My tail light has been shipped off to them. I "should" get it back by the end of next week I hope. I will of course report back on my findings.
-Peter

 

Count me in on the group for this mod.

 

I installed yellow LED's into the lens inside the taillight. I drilled 24 holes (12 in each tip), glued in the LED's and wired 'em through a resistor. The cool thing is, the stock red ones show through them, until they light up. It really looks great. Totally invisible. They blink a bit fast, but that's cool with me.
I get LED's at superbrightleds.com

 

Roadworrier, now that sounds really trick! You know the next question... any pics? And how does the yellow look (compared to normal amber turn signals)?

 

OK so everyone send your light to Roadwarrior for modding /emoticons/emotion-1.gif

 

Hello everyone! I am Michael Wright of M. D. Wright, Inc. We make the Integrator Kit, and do the brake light / turn signal mod.
So, here is the deal. We can do the install now, and it works great, but we have to use an external modified Integrator which you would have to secure to your bike. In about a month - maybe two, we will have the internal version complete. In this scenario, we will mount the RS Warrior Integrator board inside your brake light assembly. This will be a show quality piece. We prefer doing it this way, because it is a much cleaner install. Either way, it will operate the same. As for a forum member group discount,we will take $5 off the installation, and we also have a $5 (10%) off the Integrator for our annual holiday special.
Exchange option: when we do get the new control board done, we will also offer an exchange program. With this option, we will have some factory tail lights already modified with the new Integrator board. We would send it to you with a core charge, and you would get a credit back when we receive your light (Only if it is in new condition!) This way your bike is down for 15 minutes or so, versus a week or more due to shipping). The exchange program is normally $25, but since the holiday special will be over, we will offer it to forum members for $20, that way you will still have $10 off the total price, which would be $119.95.
Finally, if you would prefer the internal Integrator, and want the Holiday special too, you can pre-purchase the mod before Dec 31.
If you have any questions, please feel free to contact us.
Thank you
Michael
michael@flashalert.com
800-980-3517