RS Warrior Forum banner

1 - 20 of 36 Posts

·
Registered
Joined
·
655 Posts
Discussion Starter #1
Well i am doing my 2nd diy mod. i did the big air kit but now doing the coil relocate and sensors. and also i am doing the hidden back brake and back brake reservoir under seat also doing the lift side clean up and the open drive pully and i am going to have it all done by bike night and thats thursday . wish me luck
 

Attachments

·
Premium Member
Joined
·
3,936 Posts
This is what this forum is all about right here!

we ALL have the trusty 5 gal work bench, but Joey's UPGRADED him self with a fancy-schmancy, nice & cumfy deck chair!! what kind'a crap is that?!? Wass'a matter Joey, dont want to get the hem of your SKIRT dirty on the ground? WHY NOT JUST DROP YOUR BIKE OFF AT THE DEALERSHIP AND PAY SOMEONE TO DO IT WHILE YOU GET A MANI/PEDI SPA TREATMENT?!? :D

I sit & work on a MILK CRATE like a real man! Look how caved in and worn that thing is from my fat arse! (pic below)

Good job Joey, you'll be fine and your gonna have a blast at your Thursday night show. Post some pics of your completed project.

 

·
Registered
Joined
·
655 Posts
Discussion Starter #4
ok i am doing the left side clean up and i was looking at the fuel presser regulator and the small hose that goes to the back of the regulator is not there and dont see one omg help lol
 

Attachments

·
Registered
Joined
·
655 Posts
Discussion Starter #5
now its all done on my DIY coil plate and now in paint lol . looks so much better now hope i get the plugs right for the coils .
 

·
Registered
Joined
·
655 Posts
Discussion Starter #6
we ALL have the trusty 5 gal work bench, but Joey's UPGRADED him self with a fancy-schmancy, nice & cumfy deck chair!! what kind'a crap is that?!? Wass'a matter Joey, dont want to get the hem of your SKIRT dirty on the ground? WHY NOT JUST DROP YOUR BIKE OFF AT THE DEALERSHIP AND PAY SOMEONE TO DO IT WHILE YOU GET A MANI/PEDI SPA TREATMENT?!? :D

I sit & work on a MILK CRATE like it real man! Look how caved in and worn that thing is from my fat arse! (pic below)

Good job Joey, you'll be fine and your gonna have a blast at your Thursday night show. Post some pics of your completed project.


lol as long as you pay for my feet to be done baby lol . man i had a milk crate but my big but broke it .
 

·
Registered
Joined
·
540 Posts
I just have a question for you i been wanting to do BAK for awhile, and normally i just in but for some reason i'm so intimidated by it i don't know why. i have read all the diy's twice at least, none have a full parts list of what you need and all change around where the sensors and coils go once you pull the coffin. I'm literally so intimidated by this mod i'm considering spending twice what it prob actually cost and going with churchkeys premade kit.(which with the support i hear you get from him question and stuff wise might make it all worth it)
My question actually is what parts did you aquire to do the BIK? and is it really as simple as unbolt the box, take the stacks out of stock box and put k&n filters on and then put the smaller filters on the other vents?
 

·
Registered
Joined
·
655 Posts
Discussion Starter #9
yes i spent right at 110 on all of it just take your time and look more thin ones befor u go and pull on something out and if whin and dout pull out lol . if any thing take a lot of pic if u can
 

·
Premium Member
Joined
·
3,936 Posts
I love this Joey.... this is Git'er done, MacGuyver stuff you got going on! LOVE IT!!

PS - MacGuyver's $hit always worked...:D
 

·
Registered
Joined
·
179 Posts
Good work Joey!! Looks like you got a handle on it- jus remember to lable everything so that YOU understand it so when you hookup everything it fires up an runs-----wouldnt want you getin pised off and trying to set fire to the bike again:D
 

·
Registered
Joined
·
655 Posts
Discussion Starter #13
Lol no fire this time . And no not my dad just a worrior buddy he lives not to far from me . Well I started the lift side clean up and don't like it so only put the bracket back for the cover only . But soon I will get it done win I find something I would like to put there .
 

·
Premium Member
Joined
·
10,729 Posts
I did my pipes,pciii,Churchkey vbak,ais block off,and coil relocation at the same time.When I got everything for the left side clean up I did the right side cover and fuel pressure reg. relocate all together.

The DarkMidKnightWarrior
 

·
Registered
Joined
·
655 Posts
Discussion Starter #19
Ok about to jump back on it today . I'm going to get the hidden brake caliber done today hopefully and then hope to start on the naked pulley with either a strobe light or LED backlight. So wish me luck
 

·
Registered
Joined
·
418 Posts
Nice job on the diy and way to really just dive into it. I think I spent 3 weeks on mine during the first winter I had it and bought my plate. Man I feel lazy now :)
 
1 - 20 of 36 Posts
Top