[Archangel_369th]

This weekend installed the following:

Ivan’s tune on my stock ECU, no fuel commander.

Speedstar AIS cover on left side.

Factory AIS cover on right side with self made brackets out of aluminum flat stock, nuts and bolts.

Blue LED accent lights inside both AIS covers.

New Magna coils with red Taylor zero resistance wires.

Cleaned and re-gapped iridium spark plugs to .028.

New Cyclops LED headlight bulb.

Took her for a ride.
Throttle is a bit more snappy.
Pulls a little harder
Looks a little bit cooler.

 

[arizonawarrior]

@Archangel_369th that looks fantastic, nice work!

 

[Heftysmurf]

Glad it all worked out. Now time to enjoy it.

 

[random_guy]

I'm digging the lights in the scoops! I have some red ones I'll be installing soon in my Speedstar scoops on both sides. Just never seem to have the time. Good look, though!

 

[evilrider]

very clean bike. mine is never that clean. im a professional getter dirter-er?

 

[PTWarrior]

@Archangel_369th How are those coils holding up? Did you just build your own wires for them?

 

[Archangel_369th]

@Archangel_369th How are those coils holding up? Did you just build your own wires for them?

So far so good.
As far as the wires, I don't remember the kit number but they are Taylor wires. I believe I picked em off of Ebay.
Hope this helps,

 

[catchinganupshift]

I like the red wires.

 

[PTWarrior]

So far so good.
As far as the wires, I don't remember the kit number but they are Taylor wires. I believe I picked em off of Ebay.
Hope this helps,

Awesome, thanks for the update. Just ordered a set of those coils.

 

[PTWarrior]

@Archangel_369th Just got the same coils you have in today. Was going to try and install them this weekend. Any advice on wiring them up? From what I can gather, Black\RED to both coils and then Black\white to front and Black\Orange to rear cylinders.

 

[Archangel_369th]

@Archangel_369th Just got the same coils you have in today. Was going to try and install them this weekend. Any advice on wiring them up? From what I can gather, Black\RED to both coils and then Black\white to front and Black\Orange to rear cylinders.

I believe that is correct.
If I recall, the new coil terminals have + and - labels.
I wanted to be sure and looked up the wiring diagram in the Warrior repair manual, which you can download from this website.

I did however had to get a little creative mounting the coils as they don’t fit the frame like the OEM ones do and I used electric tape where needed around the terminals as they come in very close proximity to the frame when I mounted them.