RS Warrior Forum banner

New goodies installed

2K views 10 replies 7 participants last post by  Archangel_369th 
#1 ·
This weekend installed the following:

Ivan’s tune on my stock ECU, no fuel commander.

Speedstar AIS cover on left side.

Factory AIS cover on right side with self made brackets out of aluminum flat stock, nuts and bolts.

Blue LED accent lights inside both AIS covers.

New Magna coils with red Taylor zero resistance wires.

Cleaned and re-gapped iridium spark plugs to .028.

New Cyclops LED headlight bulb.

Took her for a ride.
Throttle is a bit more snappy.
Pulls a little harder
Looks a little bit cooler.
253509

253510

253511

253512
 
See less See more
4
#11 ·
I believe that is correct.
If I recall, the new coil terminals have + and - labels.
I wanted to be sure and looked up the wiring diagram in the Warrior repair manual, which you can download from this website.

I did however had to get a little creative mounting the coils as they don’t fit the frame like the OEM ones do and I used electric tape where needed around the terminals as they come in very close proximity to the frame when I mounted them.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top