RS Warrior Forum banner

1 - 20 of 26 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I just got a 2006 warrior. I've changed the bars and ordered a Samson ripsaw exhaust. Were do you relocate the rear brake fluid resevoir to. Any suggestions would be greatly appreciated.
 

·
Registered
Joined
·
3,582 Posts
Welcome to the forum! try using the search feature under the Forums pull down for your question. bet you may find somthing, i would post the link for you but it is to early in the AM and i am tired!!! again welcome to the forum!
 

·
Registered
Joined
·
7,926 Posts
Welcome to the bunch here. You are going to enjoy the bike and the people. Vance and hines makes a relocation kit, so do some others. You can order one from V&H by phone.
 

·
Registered
Joined
·
6,075 Posts
Congrats on your bike, and welcome to the forum.

here's an example of a relocated resevoir:
http://baronscustom.com/html/catalog/info/yamaha/warrior/AG/1/70987F8F-79A4-3EF5-7FB5-18BF6B2AE6C5

hope this helps.
 

·
Registered
Joined
·
449 Posts
Congrats, Welcome to the 4m.

Search is under the forums tab top left side of the page and here's a link.

http://www.rswarrior.com/forums/search.asp
use "rear reservoir move" or "relocate" as keywords
 

·
Registered
Joined
·
7,696 Posts
Welcome to the site Ridn24s and to a whole new world. Make sure that you get some earplugs to go with those Ripsaws coz they are LOUD!
 

·
Registered
Joined
·
356 Posts
Yep they are loud but they sure do look and sound good... As for the rear res. I made one up and mounted it where the oem one was.
 

·
Registered
Joined
·
10,143 Posts
Consider dumping the rear reservoir altogether. Search on "diss" and "reservoir"... Ah, here you go: http://rswarrior.com/forums/topic.asp?TOPIC_ID=7208&SearchTerms=diss,reservoir
I did basically the same thing and have had my bike up to Deal's Gap twice like that and had ZERO problems with it.
 

·
Registered
Joined
·
2,081 Posts
Samson wont include the relocation bracket. i called Bub's (when i had ripsaws) and got one for like $14/shipped.

check out my gallery for pics... however, i recently moved the bracket to the 'inside' of my frame and it looks ALOT better.
 

·
Registered
Joined
·
539 Posts
welcome modding already . It dont take long[/emoticons/emotion-2.gif][/emoticons/emotion-2.gif][/emoticons/emotion-2.gif]
 

·
Registered
Joined
·
111 Posts
congrats on your new machine. Just got mine today so there's a lot of us newbies.

Let's see some pictures of the bike when you get the pipes on.
 

·
Registered
Joined
·
179 Posts
I have the samson short slashers there loud[}/emoticons/emotion-1.gif] I have the baron's resevoir, it goes behind the pipes along the bottom of the frame. Half hour and the ugly stock bracket and resevoir are history.
 
1 - 20 of 26 Posts
Top