RS Warrior Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
97 Posts
Discussion Starter · #1 ·
Hello guys noob here with tons of questions.


Recently got '02 warrior with PCIII, and BOB pipes.
I don't know where to start so here we go:



1. Can somebody identify my pipes, I know those are BOB but what model? (photo in my gallery)



2. How can I tell if there any baffles in them?
3. I got couple extra collars which are screw on on the very end of my pipes, what those are for (they have different inside dia.? To create more backpressure?



4. What are those 3 buttons on PCIII (low, med, high)? Does anybody has a manual fot PCIII, I cant find anything on the web.



5. How do the light should blink on PCIII on low RPm's (right know shows lean), on med. shows in the middle, on high RPS shows on the middle too.



6. Can anybody suggest a good map for my set up, the only changes are the pipes and PCIII.



I hope somebody will help me here.



Thank you
Peter
 

·
[Retired Admin-SuperMod]
Joined
·
30,711 Posts
Look at your pipes again, it should say "BUB" and if its says "BOB" they must be chinese knock-offs. BUB has a website.


Look on the web again for the Power Commander III USB. Your unit shows the manufacturer's name too. Do a search for the manufacturer's website. It has all the manuals including installation and set-up. Their wesbite also has training videos to use the different PC3 adjustments.


The Power Commander website also has a ton of maps just navigate to the PC3 for theWarrior.


This website has a file of maps too. See the top of your screen, DOWNLOADS.


 

·
Registered
Joined
·
97 Posts
Discussion Starter · #3 ·
o crap, typo. sorry :) BUB just don't know what type.

I download couple maps of the power commander webside.

I just don't know if I do have a baffles in them or not.

How to tell?

I can't find a manual for this PCIII (it's not a usb unit).

I was able to hook it up to my laptop and see how it works.

Still don't know what are those 3 buttons on the front face.

on the idle should it show lean? or should be in the middle?
thx
 

·
[Retired Admin-SuperMod]
Joined
·
30,711 Posts
Your questions have answers that are bigger than you realize and depend on other factors.


Dynojet will send you an electronic manual for any unit you have. The Model is on the face of the unit.


Start Here: http://www.powercommander.com/powercommander_iii_usb/powercommander_technical_support.aspx


Next Try This Form: http://www.dynojet.com/jetkits/contact_support.aspx


Or Call:







Address:


Dynojet Research, Inc.
2191 Mendenhall Drive
North Las Vegas, NV 89081


Business Phone


702-399-1423


Toll Free:


Powersport / Jet Kit Products
800-992-4993


Toll Free:


Dynamometers : 800-992-3525


FAX:


702-399-1431
 

·
Registered
Joined
·
97 Posts
Discussion Starter · #5 ·
Thanx, I will contact them.


I load a map from there web, and looks like its working good.

No pop's on de-acceleration like I had before. Don't know on the fuel economy.




But still no answare on the lights and buttons.

Should the light show lean on Idle? And what are those 3 buttons for.

Thx guys and be patient
 
1 - 5 of 5 Posts
Top