RS Warrior Forum banner

1 - 10 of 10 Posts

·
Premium Member
Joined
·
2,692 Posts
Discussion Starter #1 (Edited)
(SOLD)

[[ $40 ]] Clutch and Brake lever bearings mod with the Brake adjusting bolt mod.

For sale WITH TRADE of your OEM brake and clutch lever in Great condition for
My Polished modified shortened levers with sealed ball bearings in the clutch lever and a Teflon coated sleeve bushing in the brake lever along with a smoothed down brake adjustment bolt. (Levers bearing mod)
These are currently on my bike.

You gotta send your levers with the adjusting bolt/nut to me then when I receive them I will ship mine to you. Should be a 5-6 day turn around once yours are shipped out till you get mine.

Description-
Shortened for 3 fingers.
Sanded smooth.
Polished to shine.
Sealed ball bearings in clutch lever for smoother, easier, longer lasting action and far less lever wobble.
Teflon coated steel sleeve bushing in brake lever for smoother longer lasting action and far less lever wobble.
Smoothed brake adjustment bolt tip for smoother lever braking and longer lasting Master cylinder plunger face.

$40 shipped with exchange of your clutch, brake lever with the adjusting bolt and nut.

Keep in mind that these are shortened and you should be able to use them with 3 fingers.
I have no problem using them with my Barnett pressure plate w/red springs.

Smoothed brake adjusting bolt tip purpose-
247780
247781
247782
247783
247784
247785
247786
247787
247788
247789
 

·
Registered
Joined
·
940 Posts
I was trying to get a look at them but the first picture was so shiny I went blind!
But seriously , I may be interested, got to sit on the bike and see how it would feel with just three fingers. Why are you getting rid of them don't like them anymore?

Sent from my SAMSUNG-SM-G930A using Tapatalk
 

·
Premium Member
Joined
·
2,692 Posts
Discussion Starter #3
I was trying to get a look at them but the first picture was so shiny I went blind!
But seriously , I may be interested, got to sit on the bike and see how it would feel with just three fingers. Why are you getting rid of them don't like them anymore?

Sent from my SAMSUNG-SM-G930A using Tapatalk
Oh man. I thought I edited the post saying pending sale this morning. I just did now.
Sorry about that.

I think i could do them up with yours if you'd like. Longer or whatever with the bearings installed.

I liked them and didn't have any issues I'm just going a different way and trying a different way.
I'm always changing things up lol.



Rudy Jeremias (rij1)
 

·
Registered
Joined
·
940 Posts
Thanks I may take you up on that. Lemme think about it.

Sent from my SAMSUNG-SM-G930A using Tapatalk
 

·
Registered
Joined
·
6,534 Posts
Good work Ruddy.
If they where black I'll be all over it..
Good luck bro.

Sent from my SM-A102U1 using Tapatalk
 

·
Premium Member
Joined
·
2,692 Posts
Discussion Starter #7
Ok guys, there in the mail to me.

Mike,
I possibly have a set I could work on If interested.

Omar, I did shorten and add bearings to someone recently and he's having them powder coated black. There's that option.

Rudy Jeremias (rij1)
 

·
Premium Member
Joined
·
8,717 Posts
………. I did shorten and add bearings to someone recently and he's having them powder coated black. There's that option.

Rudy Jeremias (rij1)
I'm curious Rudy how the RC bearings hold-up in the paint bake cure oven @ 350-400*F
 

·
Registered
Joined
·
147 Posts
Rudy, I have a brand new set of levers and have been looking for someone who can shorten them and add bearings. I have short little fingers and this would be a huge improvement for me.

Can you send me a PM about this?

Stu
 

·
Premium Member
Joined
·
2,692 Posts
Discussion Starter #10
I'm curious Rudy how the RC bearings hold-up in the paint bake cure oven @ 350-400*F
Same here Alan. These bearings are only rated for 240°F or so. Not sure if that is the rubber or grease rating. But I'll be sure to find out.

Rudy Jeremias (rij1)
 
1 - 10 of 10 Posts
Top