Re: V&H Big Radius 2 into 1 "Send Email's"

I went to the Powersports Dealer Expo in Indy last weekend and noticed they had a Raider in the booth with a Big Radius 2-into-1 system on it. I took a pic with my camera phone but my card reader is dead so I can't upload it. I mentioned that there has been a lot of talk on this board about a BR 2-into-1 for the Warrior and was told it is on their R&D board- but they have NO timeline for it. A few more e-mails might push them over the top OR off the edge. You didn't hear this from me...hehehe
Andy P

 

Re: V&H Big Radius 2 into 1 "Send Email's"

Andy,
I've been speaking with V&H weekly. While there may be some plans to fit the Warrior with the BR 2-1, it's no where close to happening at present. I'm hoping that my prototype will drive members here to email them so much that they can't look the other way.

 

Re: V&H Big Radius 2 into 1 "Send Email's"

Sent more emails today.

 

Re: V&H Big Radius 2 into 1 "Send Email's"

I sent them my .02
I'll commit to the "ready to purchase" list....

 

Re: V&H Big Radius 2 into 1 "Send Email's"

There are plans to manufacture the BR 2-1 for the Warrior, however, it will not be released until late this year. We will list it online a month or two before it is released.
--


Ryan Lewis

Sales/ Tech. Support
Vance & Hines Racing
13861 Rosecrans Ave.
Santa Fe Springs, CA 90670
(800) 592-2529 ext. 136
Fax: 562-802-0110
www.vanceandhines.com

 

As I stated in the "other" V&H Big Radius 2-1 mod thread, at present they "are not" planning on doing these pipes for the Warrior. There are some guys at V&H that want it to happen, but right now it's not in the works.
My contact will be back in on Monday so I will update as soon as I speak with him.
Here's the rundown from the guys I've spoken with. Hector says no, Josh says no, and Scott says maybe. The only one who'd said yes is Ryan Lewis.

quote:Originally posted by NobarsToofar

There are plans to manufacture the BR 2-1 for the Warrior, however, it will not be released until late this year. We will list it online a month or two before it is released.
--


Ryan Lewis

Sales/ Tech. Support
Vance & Hines Racing
13861 Rosecrans Ave.
Santa Fe Springs, CA 90670
(800) 592-2529 ext. 136
Fax: 562-802-0110
www.vanceandhines.com

 

Re: V&H Big Radius 2 into 1 "Send Email's"

I sent them an e-mail myself for the exhaust...we need this one!!

 

I would imagine that it would be more than the big shots, probably nearer to the propipe.

 

Keep up the emails, I have confidence that it can happen with the support of the warrior community.

 

More info and the reply's from V&H project people are here, looks positive....





http://rswarrior.com/forums/t/26810.aspx?PageIndex=7

 

I'm just a few weeks away from finishing my Big Radius 2-1 mod. I'll post when it's done and then you guys can flood V&H with phone calls and emails. Make sure you attach a photo of my bike to your emails.

 

I'm just a few weeks away from finishing my Big Radius 2-1 mod. I'll post when it's done and then you guys can flood V&H with phone calls and emails. Make sure you attach a photo of my bike to your emails.

Any recent pics you can put up?


thanks

 

My most recent pic is this. Of course when the heat shields are completely done and mounted it will look great!

 

Check this out! This sure opens up the possibilities if it will fit.


http://rswarrior.com/forums/p/109700/905325.aspx#905325

 

Ok, I sent an email to them, but I was more general. I asked if whereI shouldsend a check for Black Line that fits the Warrior. To paraphrase, they said they don't make it for the Warrior, so at least I got a reply the same day.

 

A buddy of mine has one on his Screaming Eagle 103 ci... Looks awesome .. I wasn't that impressed with how it sounded.

 

I had the modified Big Radius 2-1 on my bike and I really liked the sound. I left the fiberglassaround the baffle but I'm inclined to remove it when the pipe is finished.

 

I got the following email today from V & H:

We are looking in to developing the Big Radius line for the Yamaha Warrior.
Should be coming by the end of this year.
--

Sincerely,


Hector Montoya

Sales/Tech
Vance &
Hines Performance
13861 Rosecrans Ave.
Santa Fe Springs, CA 90670
(800)
592-2529 ext. 114
www.vanceandhines.com

 

I saw a local rider with one on his Dyna the other day...looks great, sounds much like the Propipe, a bit deeper though. It'll be interesting to see how they develop the sound for our bikes.

 

First it was June....now end of the year. Still a pipe dream for the Warrior.

 

Sent off an email to tech support and sales this week (19th May '08). Here is the reply:-





Thank you for contacting us, Scott. We are looking to have the Big Radius 2 into 1 for the Warrior available sometime after the new year of 2009.

--
Regards,

Scott Takata
Technical Support

Tel: 562.921.7461
Tel: 800.592.2529
Fax: 562.802.0110

stakata@vanceandhines.com
http://www.vanceandhines.com

Vance & Hines Performance
13861 Rosecrans Avenue, Santa Fe Springs, CA 90670-5207

 

Sent off an email to tech support and sales this week (19th May '08). Here is the reply:-





Thank you for contacting us, Scott. We are looking to have the Big Radius 2 into 1 for the Warrior available sometime after the new year of 2009.

--
Regards,

Scott Takata
Technical Support

Tel: 562.921.7461
Tel: 800.592.2529
Fax: 562.802.0110

stakata@vanceandhines.com
http://www.vanceandhines.com

Vance & Hines Performance
13861 Rosecrans Avenue, Santa Fe Springs, CA 90670-5207

That's probably as close to the truth as they can get at this point. I'm still waiting for my heat shields to be welded so I can have them chromed and complete the pipes.

 

Just sent another email to Scott.... we shall wait for a reply.

 

I sent one today also

 

Buddy,
No, there are no plans as of now to make the Big Radius for the Warrior.
--

Thank you,
Steve Darrow


Sales/ Tech. Support
Vance & Hines Racing
13861 Rosecrans Ave.
Santa Fe Springs, CA 90670
(800) 592-2529 ext. 160
Fax: 562-802-0110
www.vanceandhines.com