RS Warrior Forum banner

1 - 15 of 15 Posts

·
Registered
Joined
·
470 Posts
Discussion Starter #1
Looking for a 32 or 33 tooth pulley for the 1.5 wide drive belt. Have a 31 tooth Barons pulley that could use as a swap.


Thanks
 

·
Registered
Joined
·
470 Posts
Discussion Starter #6
The Stock pulley is for a 1 1/8" belt, but the Barons pulley doesn't have a lip on the inside of it, so it can fit either size belt.
 

·
Registered
Joined
·
470 Posts
Discussion Starter #9
Dan,do you have the part number on that? or the year Roadstarthat you used to look it up? Thanks!
 

·
Registered
Joined
·
2,600 Posts
Steve, the number is: 1 4WM-17651-00-00

for '99 - '03 Road Star. Their price to me was $64.37 US.

Dan



PS: It just arrived earlier today BTW!
 

·
Registered
Joined
·
470 Posts
Discussion Starter #11
Dan, thanks for the part number, if you get a chance post up your thoughts on the 33T pulley.


Be Safe!
 

·
Registered
Joined
·
2,600 Posts
No problemo...it'll be a while til I can actually install it though...there's still a foot of snow on the ground! By the end of April it should be on with the new 1.5" belt and custom 70t pulley!

One thing I can say now is...the **** thing is freakin heavy!!
 

·
Registered
Joined
·
470 Posts
Discussion Starter #13
Maybe I shouldn't tell ya that it was 65* here in New Orleans today,
Thanks again for the Part number!
 

·
Premium Member
Joined
·
8,912 Posts
If it's the stock configuration 32T you're after i would act on this auction before it expires. This is the Yamaha version for the Road*in AA7075 and is far superior to the Baron aluminum 32T pulley.


32T Drive Pulley For Road Star Warrior STR-4WM99-10-32 : $142.99 Landed


http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=250358689972




The front OEM steelRoad* 33T P/N for1999~2003 - PULLEY: 4WM-17651-00-00 with a street price of less than $100.00 new


This pulley will need to be machined: http://rswarrior.com/forums/p/28679/391766.aspx#391766
 

·
Registered
Joined
·
1,269 Posts
I have a 33 tooth pulley and rollers I'll sell you for $100 shipped. It is a RoadStar steel pulley. It works fine, and drops the revs quite a bit on the road. It does soften the acceleration a bit, so I put the stock 32 back on. When you go to the larger pulley, you will have to change/mod your guide rollers too.

You can call or email me through my signature link.



TJ
 
1 - 15 of 15 Posts
Top