[Abd9810]

Well, I took my bike out for test ride only a couple miles. It’s been the first time in four years that it’s been outside. It’s been a long time since my busted legs in 2020.

Anyway, I think I fixed the issue I had of it cutting out had some friends over replaced the CPS and the lean angle sensor . I cleaned up the foot controls put on a couple little bling bling . I bought another bracket for the brake pedal and modified it because I’ve already moved the horn and modified the break spring stuff years ago. I don’t like modifying my OEM stuff. I just take it off and box it up put it away, because you never know when you might need it or want it. Anyway cleaned up nicely, she’s working & sounds good, looks good. I do have Ivan‘s tune and some other goodies, I have a PC5 and a cobra tuner to put back on not sure which one I’ll use .

Oh, and lets not forget about the handlebar Risers, that was more involved than I expected, having to get some longer lines for the clutch and brake, but I followed suggestions here and got her going. Got it installed, not too happy with the sloppy fit of the Kuryakins, I did do that 4 bearing modification, but yeah, I’ll do them again, except next time better I guess.

I’d like to thank the brothers here who helped me out, Arizona Warrior, Alanh, HeftySmurf And several others that I’ve purchased parts from.

 

[Abd9810]

Oh yeah, I forgot,

I got dust on the bike even though it’s sits in the garage on carpet with several blankets to keep her warm at night

 

[Mad-scientist Madore]

View attachment 265314
View attachment 265312
Well, I took my bike out for test ride only a couple miles. It’s been the first time in four years that it’s been outside. It’s been a long time since my busted legs in 2020.

Anyway, I think I fixed the issue I had of it cutting out had some friends over replaced the CPS and the lean angle sensor . I cleaned up the foot controls put on a couple little bling bling . I bought another bracket for the brake pedal and modified it because I’ve already moved the horn and modified the break spring stuff years ago. I don’t like modifying my OEM stuff. I just take it off and box it up put it away because you never know when you might need it or want it. Anyway cleaned up nicely she’s working sounds good. Looks good. I do have Ivan‘s tune and back and some other goodies, I have a PV five and a cobra tuner to put back on not sure which one I’ll use .

Oh, and that’s not forget about the handlebar Risers, that was more involved than I expected having to get some longer lines for the clutch and break, but I follow suggestions here and got her going. Got it installed, not too happy with the sloppy fit of the Kuryakins, I did do that 4 bearing modification, but yeah, I’ll do them again, except next time better

I’d like to thank the brothers here to help me out Arizona Warrior, Alanh, HeftySmurf And several others that I’ve purchased parts from. View attachment 265313
View attachment 265311

Love that look! And love that right side air cleaner! Love the fog/driving lights way down on the forks too! Beautiful bike!

 

[Abd9810]

Love that look! And love that right side air cleaner! Love the fog/driving lights way down on the forks too! Beautiful bike!

Thank You , lots of fun left in her .
I forgot about the lights, did those during the pandemic. My brother made me a couple metric studs on his lathe that matched the originals bolts, except they had 2 sets of threads, similar to the exhaust studs with a machined nut in middle.
I think the next possible update might be an LED headlamp , but I’ve noticed the rubber trim ring is N/A 😕 .

 

[catchinganupshift]

Nice Score, I’ve been looking for something like that for my bike. I want to do both sides, both pedals. Was that specifically for the Warrior. ?

Yes. Specific to the Warrior. Found on eBay.

 

[BrickMW]

@Abd9810 Might I ask what flavor sissy bar bag that is? Beautiful ride my friend!

 

[Heftysmurf]

Looking great @Abd9810

 

[Abd9810]

Looking great @Abd9810

Yes she is , thank you for sharing your help and suggestions over the years , it makes our bikes more personal and better maintained.

 

[Abd9810]

HeftySmurf

I do have a 33 tooth pulley that’s been collecting dust , I’m thinking it’s time to get it machined up to fit .

I’ve read the mod many times so I’ll do my research first .
I think you’ve written up and sold a few of those pulleys 👍

 

[Abd9810]

@Abd9810 Might I ask what flavor sissy bar bag that is? Beautiful ride my friend!

Thank you ,

It’s part of a set , I also have the saddle bags.
I’ll look them over , but I don’t remember any tags.
I’m 2nd owner , bought it in 2014 with 3,800 miles on it . I only ride in the summer , also had a Honda Nighthawk in same condition that I recently sold . 2 completely different bikes

 

[Abd9810]

Looked over bags , didn’t find a name tag, sorry.

 

[PeterSik]

Rode her to work...


.. cuz my new Indian had a dead battery after bein parked indoors for a week

 

[catchinganupshift]

I started her up and looked at her......

 

[random_guy]

I drained her oil on Saturday in preparation to 2-plate mod and Barnett upgrade her. Somehow, I’ve acquired THREE gaskets. Good thing, too, because two of them have slight to significant creases from non-flat shipping. One is immaculate so I’m in luck.

She sits on my Jack, now, awaiting my time to actually do the work.

Will keep you posted.

 

[catchinganupshift]

I brought my Warrior a new friend to hang out with in the garage.

Now it's time to customize her a lil bit.

 

[Thommy_STC]

Nice, always ride safe ..... please

 

[Heftysmurf]

Yyyyyyyyyooooowwwwwwssssseeeeeerrrrrsssssss 😃😃😃

 

[catchinganupshift]

Yyyyyyyyyooooowwwwwwssssseeeeeerrrrrsssssss 😃😃😃

 

[Heftysmurf]

Not sure why but loved Sha Na Na.

 

[Abd9810]

“Grease for Peace “