RS Warrior Forum banner

Injector wire connector RAGE

695 views 4 replies 4 participants last post by  arizonawarrior  
#1 ·
Installing my pcIII, asmost of you know, and for the life of me i can't get theinjector wire connectorunplugged. I know that the tab just needs to be pushed in etc. I was a mechanic for a number of years! Anyways, i already managed to pull a couple of the wires out of the connector-no biggie as they can be pushed back in. I checked the yami parts list and can't find the plastic connectors. I think I may have to break the dang thing to get it unplugged.....seriously, i even sprayed some lube in there and it didn't help. What should I do? Anyone else run into this? What are the odds that I can get that connector from yami for under 200 bucks? thanks
 
#5 ·
Use a hammer . . . okay j/k. The darn thing is heat-crusted on. I know because we called Yami and had them do it to your bike just for fun. Really, we did, right guys? And they only charged us a buck.


OK seriously, I agree you need to push it in andout a few times holding the plug not the wires, then push it in, move the tab, and pull it out by the plug not the wires. Be patient it will finally come off. Feel free to pull hard, but don't jolt it. No heat guns or screw drivers because the wires in the plug are actually fragile.